Search Results

You searched for "gsxr1000,"

14 FAQs Found Page 1 of 2
	Can you send me a map with the secondary throttle plates removed for a GSX-R1000? Also does Pair valve sucker mod in place mean that the Pair valve has been removed?
	Clutch mod and HD springs: I have both in my Suzuki GSXR 1000 05". What I need help with is the clutch adjustment after both are installed. I see there are 3 adjustment areas; 1) the lever 2) the clutch release adjuster cap 3) and the clutch cable adjuster under the tank. How should all three be adjusted for the correct setting? Here is what I've noticed, when I leave free play at the lever it's hard to engage the gears but when it's tight at the lever it's no problem. I've followed your instructions to the tee and still it boggles me. I guess I don't know what I should expect with having your mods in there. Also where should the clutch start to grab? Very soon from the handle or in the middle? This has been racking my brain since I've owned the bike.
	Do pair block offs work with the GSX-R1000?
	Does the oil cooler removal kit work for the GSXR1000?
	I have a 2006 Gsxr1000, today I tried to start my bike and the only thing it did was turn over. I checked my gas tank it was low on fuel so I put some fuel in it, but it still wouldn’t start. I checked the fuses and the battery and there was nothing wrong with them. Could the spark plugs be fouled?
	I'm currently in need of suspension help on my 05 gsxr 1000. Do you have any advice on setting my STOCK shock on my bike. I am approx. 8 over and weigh 185 lbs. I believe my suspension is to blame for not getting my u-soft to hook with stock engine. Stock shock setup
	I've ordered and installed your clutch cushion mod for the 01-04 GSX-R1000. Would it defeat the purpose if I put the cushion in but left the stock springs in? With all 5 of the HD springs in the clutch lever it is very difficult to pull in, especially in traffic. Im not that big of a guy, at only 130lbs fully suited.
	Do I need a different map for each setting to use the S-DMS (Suzuki Drive Mode Selector) on my bike.
	How much power does your clutch cushion kit hold up to for the GSXR1000s and Busas? I have been using a lock up and have had nothing but problems.
	I have the street megaphone exhaust on my lowered 06 GSXR1000, had an incident that dented the bottom tube on the left header, I looked through tube and can see the exhaust port has almost a D shape, I just wanted to know would this severely affect air flow. Dented exhaust pipes
Go to Page : 12

Can't Find an Answer? If you cannot find an answer to your question, you can submit it to us and receive an answer by e-mail.